Dianeal PD-4 Peritoneal Dialysis Solution

Dianeal PD-4 Peritoneal Dialysis Solution is a brand of medicine containing the active ingredients glucose - sodium chloride - calcium - magnesium - sodium lactate.

Find out more about active ingredients.

Consumer medicine information (CMI) leaflet

Developed by the pharmaceutical company responsible for this medicine in Australia, according to TGA regulations.


Calcium chloride; glucose; magnesium chloride; sodium chloride; sodium lactate

Consumer Medicine Information

What is in this leaflet?

This leaflet answers some common questions about Dianeal Peritoneal Dialysis Solution. It does not contain all of the available information. All medicines have risks and benefits. Your doctor has weighed the risks of you using Dianeal Peritoneal Dialysis Solution against the benefit they expect it will have for you.

It does not take the place of talking to your doctor or pharmacist.

If you have any concerns about taking this medicine, ask your doctor or pharmacist.

Back to top

What Dianeal Peritoneal Dialysis Solution is used for?

Kidney failure occurs when the kidneys can no longer function adequately and a person's survival depends upon either a kidney transplant or renal replacement therapy, including dialysis.

Dialysis is the process of filtering or cleansing the blood of waste products and excess water and removing them from the body. There are two methods of dialysis treatment - haemodialysis and peritoneal dialysis. Both employ specially formulated solutions to perform blood cleansing.

Peritoneal dialysis uses the body's own peritoneal or abdominal membrane as a filter to cleanse the blood. The peritoneal membrane lines the peritoneal cavity. A sterile tube called a catheter is inserted by a simple surgical procedure through the wall of your abdominal cavity. This provides an opening through which the dialysis solution can be infused into the abdominal cavity. Waste products pass from the blood stream, through the peritoneal membrane and into the dialysis solution. Blood cells and large molecules such as proteins are retained since they are too large to pass through the membrane. The used dialysis solution is periodically drained from the abdominal cavity and replaced with fresh solution, usually 3-4 times a day.

Peritoneal dialysis procedures are easy to learn but it is imperative that you adhere to the procedure taught by your health care professional.

There are two ways of performing peritoneal dialysis: Continuous Ambulatory Peritoneal Dialysis (CAPD) or Automated Peritoneal Dialysis (APD) (i.e., peritoneal dialysis performed by a machine). PD (Peritoneal Dialysis) offers continuous self-care dialysis.

Back to top

Before you use Dianeal Peritoneal Dialysis Solution

The exchange procedure involves draining the used dialysis solution containing the waste products, and instilling fresh solution into the peritoneal cavity. This must be performed with great care to avoid infection. The exchange procedure should be undertaken where there is privacy and a clean, well-lit environment: home, office or bathroom. The environment should be clean, dust-free, ventilated but free from draughts.

It is important that the catheter exit site on the abdominal wall is kept clean and free from infection. The catheter must be well-secured. To ensure this, you will be required to examine and cleanse your exit site daily. This must be done in the manner in which you were taught during your peritoneal dialysis education.

Check the product label for the correct volume, Glucose concentration and expiry date. The integrity of the pack should be checked by squeezing the bag and examining carefully for signs of leakage. Ensure that the solution is clear.

Back to top

How to use Dianeal Peritoneal Dialysis Solution

The single most important consideration in PD is asepsis, i.e., maintaining very clean conditions during all procedures. While the exchange procedure is a simple technique to learn, it must be done with great care every time. This is because there is always a risk that you may contaminate the solution and therefore cause an infection.

It will probably be necessary to warm CAPD solutions to body temperature before use. Specially designed thermostatically-controlled portable warming boxes are available for this purpose. Use of microwave ovens is not recommended because the product may be damaged, resulting in leakage and risk of infection.

In APD the machine warms the solution to body temperature before it is installed in the peritoneal cavity.

Several important points must be considered before and during use of Dianeal ® Peritoneal Dialysis Solutions:

  1. Use the solutions strictly in accordance with the instructions provided to you during your peritoneal dialysis education.
  2. You should dialyse only with the volume of solution and at the frequency prescribed by your Kidney Doctor or your Dialysis Centre.
  3. For the route of administration, please see Description and Use of Peritoneal Dialysis Solutions above.
  4. Do not use the solution unless it is clear and the seal is intact.
  5. Aseptic technique must be used all times.
  6. The expected effects of dialysis are correction of acid-base balance and electrolyte disturbances, fluid accumulation and removal of toxic waste products from the blood.
  7. Failure to perform dialysis as ordered by your Kidney Doctor will result in rapid acid-base balance disturbances and fluid accumulation (which may result in pulmonary oedema and electrolyte imbalances including raised serum potassium). This could cause a life-threatening situation.
  8. Cessation of dialysis must be in consultation with your Kidney Doctor or the Renal Unit or Dialysis Centre.
  9. An accurate fluid balance record must be kept.
  10. You must check your weight regularly to avoid accumulating fluid in your body.
  11. You will be required to have regular blood tests in order to monitor your condition.
  12. You should regularly visit your Kidney Doctor or the Renal Unit or Dialysis Centre.

Back to top

While you are using Dianeal Peritoneal Dialysis Solution

Discuss with your doctor or dialysis nurse the progress you have experienced during the treatment, whether any complication has occurred, especially during the first few days of therapy. Frequent clinical evaluation and laboratory tests may be required.

Back to top

Side effects

Patients using peritoneal dialysis have experienced one or more of the following unwanted effects: abdominal distension, loss of appetite, constipation, scrotal or labial swelling, backache, postural disturbances, pain on inflow and/or outflow, peritonitis (inflammation/infection of the peritoneal cavity), exit site infection, tunnel infection, muscle weakness and cramps. Any undesirable effect should be reported immediately to your Kidney Doctor or the Renal Unit or Dialysis Centre.

Back to top

In case of Overdose

If you accidentally infuse a larger volume of Dianeal ® than prescribed by your Kidney Doctor, you may experience abdominal distension and pain. If you exceed the number of exchanges prescribed, muscle weakness and cramps may occur. You should seek advice from your Kidney Doctor or the Renal Unit or Dialysis Centre.

Back to top

Product Descriptions

What Dianeal Peritoneal Dialysis Solution looks like?

Dianeal Peritoneal Dialysis Solutions are supplied in either a single Viaflex plastic bag or a Freeline Solo Twin Bag (solution bag with drainage bag attached).

Back to top

What is in Dianeal Peritoneal Dialysis Solution?

Dianeal Peritoneal Dialysis Solution contains the following ingredients:

Active Ingredients:

Calcium Chloride, Glucose, Magnesium Chloride, Sodium Chloride, Sodium Lactate

Inactive Ingredients:

Water for Injections, Sodium Hydroxide, Hydrochloric Acid

Back to top

How to store Dianeal Peritoneal Dialysis Solution

Store Dianeal ® solutions under clean, dry conditions, protected from physical damage and at temperatures not exceeding 30°C. However, individual bags may be warmed in a warming box to 38°C prior to use. Microwave ovens should not be used (see above). The duration of warming an individual bag should not exceed one day.

The expiry date is located on the bottom right-hand corner of the label. Solutions should not be used after the expiry date. Dianeal ® solution should be clear. If it is not, do not use that bag; isolate it from your stock and return it to your Dialysis Centre. Do not use solutions from damaged cartons.

Back to top

Where can you get more information?

Further information can be obtained from your Kidney Doctor, or the Renal Unit or Dialysis Centre of the hospital which provided your peritoneal dialysis education.

Back to top

Name and address of the Sponsor

Manufactured by:

Baxter Healthcare Pty Ltd
1 Baxter Drive
Old Toongabbie, NSW 2146

Distributed in New Zealand by:

Baxter Healthcare Ltd
33 Vestey Drive
Mount Wellington
Auckland 6
New Zealand

This Consumer Medicines Information Leaflet was revised 6th December 2002

Back to top

CMI provided by MIMS Australia, December 2014  

Related information - Dianeal PD-4 Peritoneal Dialysis Solution


02 Nov 2012 Find reliable, independent information about kidney failure. You’ll find resources for consumers and health professionals about this health condition and any related treatments, medicines and medical tests.kidney failure is also known as renal failure.
30 Oct 2012 Information on medicines available in Australia containing glucose - sodium chloride - calcium - magnesium - sodium lactate, including our latest evidence-based information and resources for health professionals and consumers. The active ingredient is the chemical in a medicine that makes it work. Medicines that contain the same active ingredient can be available under more than one brand name. Brands include both active ingredients and inactive ingredients. You'll find information about brands of medicines that contain glucose - sodium chloride - calcium - magnesium - sodium lactate below, including their consumer medicine information (CMI) leaflets.